Release Notes

• Icons when an audio gain or reverse field order has been applied
• When clip is in "hold last frame", the line is not orange anymore (so it is not confused with the pause)
• Issue when scrubbing very quickly after the out point in the timeline
• Unable to drag and drop in playlists after a failed drag and drop
• It is now possible to drag and drop "Live Clips" from one playlist to another
• Some possible issues if the playlist was modified externally (by another OnTheAir Video application or a third party)
• Audio issues with some files
• Issue with the "Contact Support" form which did not send the technical logs

• Issue with the durations of still images
• Audio issues with some files using larger chunks of audio and read from slower hard drives
• Issue with write privileges of some plugins (for example VideoHub plugin)
• Added a few logs when skipping offline files
• Ability to do "DELETE" requests in the REST API
• Reconnections to media when they are moved in different folders

• Added a warning when an M|Family device is too hot
• When modifying a metadata keyset, it is now propagated to all "Viewers"
• Autodetect now works with Teranex
• Possible interlacing issue with DV codecs
• Possible issue when receiving illegal CC values with the M|Family devices

WARNING: If you control OnTheAir CG from OnTheAir Node, you should upgrade also OnTheAir Node to version 3.3.3 or later as we use a new authentication system in the OnTheAir CG REST API.

• End animations are now played even on items that are set to "Stay Forever"
• Project will only be updated when modification date changes
• When a Ticker folder is not set to "Stay Forever", but the project is Looped in CG Server, the ticker will start again from the beginning
• In OnTheAir CG Server, even if you open a project with the same UID as another opened project, it will be attributed a new UID

Release Notes for OnTheAir Node 3.3.3

• OnTheAir CG 3 plugin. WARNING: You need to upgrade OnTheAir CG Server to version 3.1.2 or later!
• Decompression of some MXF
• Playback issue with some "segmented" movies that were not encoded until the end
• Fixed IMX field dominance detection in MXF files
• Playback Status incorrect when initializing engine with the REST API

Release Notes for OnTheAir Live 3.0.5 and OnTheAir Manager 3.0.3

• Scrubbing in the inspector
• Memory issues with the inspector
• Current position time information
• UI issues in Inspector

• Preferences in ATEM control to set if the next clip should be automatically cued when the source is not selected anymore
• Drag and drop between playlists was sometimes not working anymore
• Decompression of some MXF files
• Playback issue with some "segmented" movies that were not encoded until the end
• IMX field dominance detection in MXF files

• Fixed an issue where the timecode source could revert back to Videocard timecode for BlackMagic devices.

• It is now possible to edit the format of digital clocks.
• It is now possible to modify the URL of a Movie via AppleScript (it was already possible via the REST API).
• Some UTF-8 characters were not properly displayed. Note that some text items may now have shifted a little bit vertically, so check your projects with text alignments after the update.
• Some issues in 10.9.

• UI issue when no monitor connected to the computer.
• Problems when importing VPLS playlists with missing information in the XML.
• Issue if a clip had no URL set.
• Possible issues with the ATEM plugin.

• This version fixes an issue with Closed Captioning in some cases with Blackmagic-Design devices.

Release Notes for OnTheAir Node 3.0.2

• Some possible issues with image and logo playback.

Release Notes for OnTheAir Live 3.0.2

• Behaviour when no Local Media Folder set in preferences (Local Media Not Found).
• Misplaced playback icon when thumbnails are not shown.
• Attributes not always displayed after application going in background.
• Absolute start time is now correctly set.
• Some leaks with the inspector.

Release Notes for OnTheAir Manager 3.0.2

• Behaviour when no Local Media Folder set in preferences (Local Media Not Found).
• Some leaks with the inspector.

• Support for psf formats with the M|Family.
• Destination name is not added automatically anymore if file name will be different.
• REST requests to change the path of a destination and group requests to enable/disable destinations (see REST API documentation available upon request).
• Some possible name conflicts.
• XDCAM and HDV GOP size is not correct in PAL.
• AVPresets preferences pane is now resizing correctly.
• When duplicating schedules via alt+drag, the duplicated schedule is now disabled.
• CC icon not shown when Closed Captioning present.

• Option to deinterlace or not.
• The H.264 hardware encoder available on some Macs (most Intel Core i5 or i7) can now again be used to lower CPU usage.

Release notes for both OnTheAir Video Express and OnTheAir Video 3.3.1

• Modify the audio gain for clips
• Control the playback from an ATEM mixer through an IP protocol (no GPI cabling needed anymore)
• Skip to 5 seconds before the end of the clip shortcut (to just check how clips chain): cmd + alt + left or right arrows
• The "Revert to" older version of the playlist
• Some issues with the SD 16:9 resize modes
• When replacing clip, attributes are now kept

Release notes for OnTheAir Video only

• Create "Live inputs" (this will either be a real video card input or a direct link from OnTheAir Video or OnTheAir Node) and use those Live inputs as a video clip in your playlist. This greatly simplifies the workflow when you want to handle Live inputs.
• "Automatically use images as logos" preference. When enabled, if you have in the same folder a png image and a movie file that bear the same name, we will use the png image automatically for the logo of that movie. These png images are then not added to the playlist when doing a drag and drop.
• Optimizations of the "Smart Resize and Graphics" engine for better performances on smaller computers

• Add metadata to your files. Either embedded in the QuickTime file, or as a sidecar file (Axle, CatDV, or Cantemo).
• Record to MXF DNxHD.
• "Size to fit" option when selecting the number of Viewers. When enabled, it behaves as before. When disabled, you can now use the lower right corner of the first viewer to manually set the size that you want it to have. Viewers are thus not automatically resized with the window.
• Display more viewers at once on a smaller screen (up to 25).
• When there are issues with remote recorders, the warnings and logs are now displayed.
• Behaviour when AVC-Intra encoder was too slow.
• GPI controls are now processed quicker, and allow selecting "No GPI device".
• Issue when writing .mov files to an ISIS Volume.

• Added a button to delete schedules and a confirmation window before deleting the schedule.
• Fixed an issue when sending schedules to OnTheAir Node. This could take a long time as too many events were sent.
• Fixed an issue where the files in inspector would show as "Local Media Not Found".
• Fixed an issue when deleting clips in the Media Browser.
• Fixed an issue with the new version notifications that would not work in 10.8.

• Optimisation of the smart playout engine for better performances on smaller computers.
• Added the possibility to modify the audio gain for each clip.
• Added the ability to scrub (requires OnTheAir Live 3.0 or later).
• Plugin selection is now saved.
• Added notifications when a new version is available (users will be notified when the next version is released).
• Updated the plugin for OnTheAir CG 3 with improved connections.
• Improved compatibility with El Capitan.
• Fixed an issue with the status of the license when using dongles (would show up as DEMO).
• Fixed an issue of the Node remaining in the "Starting up..." status.
• Fixed an issue with 16:9 aspect ratios in SD.
• Fixed an issue with some codecs shown as "Unknown" in the description in OnTheAir Live or OnTheAir Manager (for example, some XDCAM files).

OnTheAir Live goes from version 1.2.14 to version 3.0. The reason for that version jump is that OnTheAir Live 1.3.5 still used QuickTime to preview and trim the clip in the inspector. This could be confusing as OnTheAir Live was not able to read some files that OnTheAir Node could, or the other way around. With version 3.0, we now use the same engine for the OnTheAir Live preview as OnTheAir Node 3 uses to playout files. So the files that can be read by both applications are identical. This is a major change in itself which then deserved a major version number change. By using version 3, we also bring it in line with OnTheAir Node, which is also at version 3.

• Added the ability to scrub in the timeline of the playlist (hold the cmd key down and click - requires OnTheAir Node 3.3 or later).
• Fixed an issue with Keychain.

• Added the ability to trigger Start/Stop logging with AppleScripts (and thus with GPICommander).
• Added the ability to enter a TC offset.
• Documents now save the previous position of the windows to restore it for the next document.
• Fixed an issue when sending to Final Cut Pro X.

• Added the "Live input" feature to be able to use a real video input (AJA, Blackmagic-Design, or M|Family) and/or a direct link (from OnTheAir Node or OnTheAir Video) as a video item in a CG project.
• Added "Audio mixing" to support multiple sources of audio.
• RSS Tickers can now "publish" their URL (can now be modified with the REST API).
• Still images and Videos can now "publish" their path (can now be modified with the REST API).
• Fixed a refresh issue when updating the variables with the REST API.