MovieRecorder
Version 4.5.5 - 2 June 2023
|
Download |
Once downloaded, unzip the file, and drag and drop the "MovieRecorder" Application in your Applications Folder.
Warning!
Do NOT run MovieRecorder from your downloads folder or it will be quarantined. Always drag and drop from the Downloads folder to the Applications folder before using it.
Make sure also to download and install the drivers for your video device:
![]()
AJA Drivers
|
||
![]()
Blackmagic-Design Drivers
|
||
![]()
Deltacast Drivers
For Intel and Silicon
|
In DEMO mode, the application will burn a blue frame in the recorded file or at output at some intervals. That's the only limitation and difference. After your test, you will keep on using the same application, just with the demo mode unlocked.
Purchase a license through one of our resellers or the Softron online store, then just activate your serial number in the License window or plug your dongle in the computer.
Just download the latest version and replace your previous version. It is always recommended to run extensive tests with your specific workflow and setup before putting a new version in production. You can use a free demo version for that on a separate computer. Previous legacy versions are available from the general downloads page.
You do not need to deactivate and reactivate your serial number when updating your Softron software. Read the following article to know when to deactivate.
This software uses code of FFmpeg, licensed under the LGPLv2.1 and its source can be downloaded here.
MovieRecorder 4.5.2
19 January 2023
|
Download | |
MovieRecorder 4.4.3
30 June 2022
|
Download | |
![]()
MovieRecorder 4.4.3 (Intel)
30 June 2022
|
Download | |
![]()
MovieRecorder 4.3.9
31 August 2020
|
Download | |
![]()
MovieRecorder 4.3.8
26 June 2020
|
Download | |
![]()
MovieRecorder 4.2.1
6 June 2019
|
Download | |
![]()
MovieRecorder 4.1.3
4 December 2018
|
Download | |
![]()
MovieRecorder 4.0.8
11 Septmeber 2018
|
Download | |
![]()
MovieRecorder 3.6.9
22 Ocotber 2018
|
Download | |
![]()
MovieRecorder 3.5.5
28 April 2017
|
Download | |
![]()
MovieRecorder 3.4.14
8 November 2016
|
Download | |
![]()
MovieRecorder 3.3.18
28 June 2016
|
Download | |
![]()
MovieRecorder 3.2.14
9 September 2015
|
Download | |
![]()
MovieRecorder 2.5.24
2 April 2015
|
Download | |
![]()
MovieRecorder 1.2.3
18 November 2011
|
Download | |
![]()
MovieRecorder Control 2.3.4
3 May 2013
|
Download |
This software uses code of FFmpeg, licensed under the LGPLv2.1 and its source can be downloaded here.
MovieRecorder Express
Version 4.5.5 - 2 June 2023
|
Download |
Once downloaded, unzip the file, and drag and drop the Application in your Applications Folder.
Warning! Do NOT run the Application from your downloads folder or it will be quarantined. Always drag and drop from the Downloads folder to the Applications folder before using it.
Make sure also to download and install the drivers for your video device:
![]()
AJA Drivers
|
||
![]()
Blackmagic-Design Drivers
|
||
![]()
Deltacast Drivers
For Intel and Silicon
|
In DEMO mode, the application will burn a blue frame in the recorded file or at output at some intervals. That's the only limitation and difference. After your test, you will keep on using the same application, just with the demo mode unlocked.
Purchase a license through one of our resellers or the Softron online store, then just activate your serial number in the License window or plug your dongle in the computer.
Just download the latest version and replace your previous version. It is always recommended to run extensive tests with your specific workflow and setup before putting a new version in production. You can use a free demo version for that on a separate computer. Previous legacy versions are available from the general downloads page.
You do not need to deactivate and reactivate your serial number when updating your Softron software. Read the following article to know when to deactivate.
This software uses code of FFmpeg, licensed under the LGPLv2.1 and its source can be downloaded here.
MovieRecorder Express 4.5.2
19 January 2023
|
Download | |
MovieRecorder Express 4.4.3
30 June 2022
|
Download | |
![]()
MovieRecorder Express 4.3.9
31 August 2020
|
Download | |
![]()
MovieRecorder Express 4.3.8
26 June 2020
|
Download | |
![]()
MovieRecorder Express 4.2.1
6 June 2019
|
Download | |
![]()
MovieRecorder Express 4.1.3
4 December 2018
|
Download | |
![]()
MovieRecorder Express 4.0.8
11 Septmeber 2018
|
Download |
This software uses code of FFmpeg, licensed under the LGPLv2.1 and its source can be downloaded here.
Multicam Logger
Version 2.2.7 - 16 May 2023
|
Download |
Once downloaded, unzip the file, and drag and drop the "MovieRecorder" Application in your Applications Folder.
Warning!
Do NOT run the application from your downloads folder or it will be quarantined. Always drag and drop from the Downloads folder to the Applications folder before using it.
Make sure also to download and install the drivers for your video device:
![]()
AJA Drivers
|
||
![]()
Blackmagic-Design Drivers
|
||
![]()
Deltacast Drivers
For Intel and Silicon
|
In DEMO mode, Multicam Logger will allow you to add 10 change of angles and send them to your editing station. That's the only limitation and difference. After your test, you will keep on using the same application, just with the demo mode unlocked
Purchase a license through one of our resellers or the Softron online store, then just activate your serial number in the License window or plug your dongle in the computer.
Just download the latest version and replace your previous version. It is always recommended to run extensive tests with your specific workflow and setup before putting a new version in production. You can use a free demo version for that on a separate computer. Previous legacy versions are available from the general downloads page.
You do not need to deactivate and reactivate your serial number when updating your Softron software. Read the following article to know when to deactivate.
This software uses code of FFmpeg, licensed under the LGPLv2.1 and its source can be downloaded here.
![]()
Multicam Logger 2.2.6
7 December 2022
|
Download | |
![]()
Multicam Logger 2.1.12
30 December 2020
|
Download | |
![]()
Multicam Logger 2.1.9
16 July 2020
|
Download | |
![]()
Multicam Logger 2.1.2
9 October 2019
|
Download | |
![]()
Multicam Logger 2.0.4
8 April 2019
|
Download | |
![]()
Multicam Logger 1.5.3
3 July 2018
|
Download | |
![]()
Multicam Logger 1.4.11
14 April 2017
|
Download |
This software uses code of FFmpeg, licensed under the LGPLv2.1 and its source can be downloaded here.
M|Replay 2.2
Pre-release (Universal)
|
Download Pre-Release | |
![]()
M|Replay 2
Version 2.1.5 - 13 October 2020
|
Download |
Once downloaded, unzip the file, and drag and drop the "MovieRecorder" Application in your Applications Folder.
Warning! Do NOT run M|Replay from your downloads folder or it will be quarantined. Always drag and drop from the Downloads folder to the Applications folder before using it.
Make sure also to download and install the drivers for your video device:
![]()
AJA Drivers
|
||
![]()
Blackmagic-Design Drivers
|
||
![]()
Deltacast Drivers
For Intel and Silicon
|
Purchase a license through one of our resellers or the Softron online store, then just activate your serial number in the License window or plug your dongle in the computer.
Just download the latest version and replace your previous version. It is always recommended to run extensive tests with your specific workflow and setup before putting a new version in production. You can use a free demo version for that on a separate computer. Previous legacy versions are available from the general downloads page.
You do not need to deactivate and reactivate your serial number when updating your Softron software. Read the following article to know when to deactivate.
This software uses code of FFmpeg, licensed under the LGPLv2.1 and its source can be downloaded here.
This software uses code of FFmpeg, licensed under the LGPLv2.1 and its source can be downloaded here.
Streaming Center
Version 1.3 - 19 January 2021
|
Download |
Once downloaded, unzip the file, and drag and drop the Application in your Applications Folder.
Warning!
Do NOT run the Application from your downloads folder or it will be quarantined. Always drag and drop from the Downloads folder to the Applications folder before using it.
Make sure also to download and install the MovieRecorder or MovieRecorder Express:
Purchase a license through one of our resellers or the Softron online store, then just activate your serial number in the License window or plug your dongle in the computer.
Just download the latest version and replace your previous version. It is always recommended to run extensive tests with your specific workflow and setup before putting a new version in production. You can use a free demo version for that on a separate computer. Previous legacy versions are available from the general downloads page.
You do not need to deactivate and reactivate your serial number when updating your Softron software. Read the following article to know when to deactivate.
This software uses code of FFmpeg, licensed under the LGPLv2.1 and its source can be downloaded here.
![]()
MovieStreamer HLS
Version 2.2 - 9 May 2018
|
Download |
Once downloaded, unzip the file, and drag and drop the Application in your Applications Folder.
Warning!
Do NOT run the Application from your downloads folder or it will be quarantined. Always drag and drop from the Downloads folder to the Applications folder before using it.
In DEMO mode, MovieStreamer HLS will record demo frames every few seconds in the streams.
Purchase a license through one of our resellers or the Softron online store, then just activate your serial number in the License window or plug your dongle in the computer.
Just download the latest version and replace your previous version. It is always recommended to run extensive tests with your specific workflow and setup before putting a new version in production. You can use a free demo version for that on a separate computer. Previous legacy versions are available from the general downloads page.
You do not need to deactivate and reactivate your serial number when updating your Softron software. Read the following article to know when to deactivate.
This software uses code of FFmpeg, licensed under the LGPLv2.1 and its source can be downloaded here.
![]()
MovieStreamer HLS 2.0.5
28 April 2016
|
Download |
OnTheAir Video
Version 4.1.5 - 5 June 2023
|
Download "Single" Version |
Download "Multi" Version |
OnTheAir Video 4 is a major version upgrade. There has been major changes that are important to know before upgrading, so make sure to read the following article: What's new in OnTheAir Video (Express) 4 & Important warnings.
Download the SINGLE version if you just need to play on one output, the Multi version to be able to play up to 8 streams on one Mac. Once downloaded, unzip the file, and drag and drop either the single application or the multiple applications folder in your "Applications" folder.
Warning! Do NOT run OnTheAir Video from your downloads folder or it will be quarantined. Always drag and drop from the Downloads folder to the Applications folder before using it.
Make sure also to download and install the drivers for your video device:
![]()
AJA Drivers
|
||
![]()
Blackmagic-Design Drivers
|
||
![]()
Deltacast Drivers
For Intel and Silicon
|
If you have the Dynamic Graphics Overlay option, you will also need OnTheAir CG Designer. You do not need a license to create CG projects to be used in OnTheAir Video DGO option. Download OnTheAir CG Designer here:
OnTheAir CG Designer
Create Graphics for the DGO
|
Download | More Info... | |
LogAnalyzer
Analyze As-Run Logs
|
Download |
In DEMO mode, the application will burn a blue frame in the recorded file or at output at some intervals. That's the only limitation and difference. After your test, you will keep on using the same application, just with the demo mode unlocked.
Purchase a license through one of our resellers or the Softron online store, then just activate your serial number in the License window or plug your dongle in the computer.
Just download the latest version and replace your previous version. It is always recommended to run extensive tests with your specific workflow and setup before putting a new version in production. You can use a free demo version for that on a separate computer. Previous legacy versions are available from the general downloads page.
You do not need to deactivate and reactivate your serial number when updating your Softron software. Read the following article to know when to deactivate.
This software uses code of FFmpeg, licensed under the LGPLv2.1 and its source can be downloaded here.
This software uses code of FFmpeg, licensed under the LGPLv2.1 and its source can be downloaded here.
This software uses the MediaInfo library, Copyright (c) 2002-2023 MediaArea.net SARL.
OnTheAir Video Express
Version 4.1.5 - 5 June 2023
|
Download "Single" Version |
Download "Multi" Version |
OnTheAir Video Express 4 is a major version upgrade. There has been major changes that are important to know before upgrading, so make sure to read the following article: What's new in OnTheAir Video (Express) 4 & Important warnings.
Download the SINGLE version if you just need to play on one output, the Multi version to be able to play up to 8 streams on one Mac. Once downloaded, unzip the file, and drag and drop either the single application or the multiple applications folder in your "Applications" folder.
Warning! Do NOT run OnTheAir Video Express from your downloads folder or it will be quarantined. Always drag and drop from the Downloads folder to the Applications folder before using it.
Make sure also to download and install the drivers for your video device:
![]()
AJA Drivers
|
||
![]()
Blackmagic-Design Drivers
|
||
![]()
Deltacast Drivers
For Intel and Silicon
|
In DEMO mode, the application will burn a blue frame in the recorded file or at output at some intervals. That's the only limitation and difference. After your test, you will keep on using the same application, just with the demo mode unlocked.
Purchase a license through one of our resellers or the Softron online store, then just activate your serial number in the License window or plug your dongle in the computer.
Just download the latest version and replace your previous version. It is always recommended to run extensive tests with your specific workflow and setup before putting a new version in production. You can use a free demo version for that on a separate computer. Previous legacy versions are available from the general downloads page.
You do not need to deactivate and reactivate your serial number when updating your Softron software. Read the following article to know when to deactivate.
This software uses code of FFmpeg, licensed under the LGPLv2.1 and its source can be downloaded here.
OnTheAir Video Express 4.1.3
16 April 2023
|
Download "Single" Version |
Download "Multi" Version | |
OnTheAir Video Express 4.1.1
30 June 2022
|
Download "Single" Version |
Download "Multi" Version | |
OnTheAir Video Express 4.0
21 May 2021
|
Download "Single" Version |
Download "Multi" Version | |
![]()
OnTheAir Video Express 3.8.6
17 July 2020
|
Download "Single" Version |
Download "Multi" Version | |
![]()
OnTheAir Video Express 3.7.8
17 June 2019
|
Download "Single" Version |
Download "Multi" Version | |
![]()
OnTheAir Video Express 3.6.6
10 July 2018
|
Download "Single" Version |
Download "Multi" Version | |
![]()
OnTheAir Video Express 3.5.4
26 June 2017
|
Download "Single" Version |
Download "Multi" Version | |
![]()
OnTheAir Video Express 3.4
21 February 2017
|
Download "Single" Version |
Download "Multi" Version | |
![]()
OnTheAir Video Express 3.3.13
1 December 2016
|
Download "Single" Version |
Download "Multi" Version | |
![]()
OnTheAir Video Express 3.2.9
27 August 2015
|
Download "Single" Version |
Download "Multi" Version | |
![]()
OnTheAir Video Express 1.2.16
22 October 2013
|
Download |
This software uses code of FFmpeg, licensed under the LGPLv2.1 and its source can be downloaded here.
This software uses the MediaInfo library, Copyright (c) 2002-2023 MediaArea.net SARL.
OnTheAir Node 4
Version 4.0.2 - 22 May 2023
|
Download |
Once downloaded, unzip the file, and double-click on the installer to start the installation.
Make sure also to download and install the drivers for your video device:
![]()
AJA Drivers
|
||
![]()
Blackmagic-Design Drivers
|
||
![]()
Deltacast Drivers
For Intel and Silicon
|
To analyze as-run-logs, download the LogAnalyzer application.
OnTheAir Live
Control OnTheAir Node for live operations (Playlist based)
|
|
OnTheAir Manager
Control OnTheAir Node for 24/7 unattended operations (Schedule based)
|
|
LogAnalyzer
Analyze As-Run Logs
|
In DEMO mode, the application will burn a blue frame in the recorded file or at output at some intervals. That's the only limitation and difference. After your test, you will keep on using the same application, just with the demo mode unlocked.
Purchase a license through one of our resellers or the Softron online store, then just activate your serial number in the License window or plug your dongle in the computer.
Just download the latest version and replace your previous version. It is always recommended to run extensive tests with your specific workflow and setup before putting a new version in production. You can use a free demo version for that on a separate computer. Previous legacy versions are available from the general downloads page.
You do not need to deactivate and reactivate your serial number when updating your Softron software. Read the following article to know when to deactivate.
This software uses code of FFmpeg, licensed under the LGPLv2.1 and its source can be downloaded here.
OnTheAir Node 4.0
27 February 20230
|
Download | |
![]()
OnTheAir Node 3.8.4
16 March 2020
|
Download | |
![]()
OnTheAir Node 3.7.8
17 June 2019
|
Download | |
![]()
OnTheAir Node 3.6.5
6 July 2018
|
Download | |
![]()
OnTheAir Node 3.5.4
26 June 2017
|
Download | |
![]()
OnTheAir Node 3.4.2
10 February 2017
|
Download | |
![]()
OnTheAir Node 3.3.10
18 October 2016
|
Download | |
![]()
OnTheAir Node 3.2.2
6 June 2015
|
Download | |
![]()
OnTheAir Node 1.2.38
18 June 2014
|
Download |
This software uses code of FFmpeg, licensed under the LGPLv2.1 and its source can be downloaded here.
This software uses the MediaInfo library, Copyright (c) 2002-2023 MediaArea.net SARL.
OnTheAir Live 4
Version 4.0 - 27 February 2023
|
Download |
Once downloaded, unzip the file, and drag and drop the Application in your Applications Folder.
OnTheAir Node 4
Playout server
|
More Info... | |
![]()
OnTheAir Tools 1.34
9 December 2019
|
Download |
Just download the latest version and replace your previous version. It is always recommended to run extensive tests with your specific workflow and setup before putting a new version in production. You can use a free demo version for that on a separate computer. Previous legacy versions are available from the general downloads page.
You do not need to deactivate and reactivate your serial number when updating your Softron software. Read the following article to know when to deactivate.
This software uses code of FFmpeg, licensed under the LGPLv2.1 and its source can be downloaded here.
This software uses code of FFmpeg, licensed under the LGPLv2.1 and its source can be downloaded here.
This software uses the MediaInfo library, Copyright (c) 2002-2023 MediaArea.net SARL.
OnTheAir Manager 4
Version 4.0.2 - 1 June 2023
|
Download |
Once downloaded, unzip the file, and drag and drop the Application in your Applications Folder.
OnTheAir Node
Playout server
|
||
![]()
OnTheAir Tools 1.34
9 December 2019
|
OnTheAir Manager can not send schedules to OnTheAir Node but you can build schedules. (Send us an email to ask for a temporary serial number to test it)
Purchase a license through one of our resellers or the Softron online store, then just activate your serial number in the License window or plug your dongle in the computer.
Just download the latest version and replace your previous version. It is always recommended to run extensive tests with your specific workflow and setup before putting a new version in production. You can use a free demo version for that on a separate computer. Previous legacy versions are available from the general downloads page.
You do not need to deactivate and reactivate your serial number when updating your Softron software. Read the following article to know when to deactivate.
This software uses code of FFmpeg, licensed under the LGPLv2.1 and its source can be downloaded here.
This software uses code of FFmpeg, licensed under the LGPLv2.1 and its source can be downloaded here.
This software uses the MediaInfo library, Copyright (c) 2002-2023 MediaArea.net SARL.
OnTheAir CG 3.6
Pre-Release (Universal Version)
|
Download Pre-Release | |
![]()
OnTheAir CG
Version 3.5.4 - 27 April 2021
|
Download |
Once downloaded, unzip the file, and drag and drop the Application in your Applications Folder.
Warning!
Do NOT run the Application from your downloads folder or it will be quarantined. Always drag and drop from the Downloads folder to the Applications folder before using it.
Make sure also to download and install the drivers for your video device:
![]()
AJA Drivers
|
||
![]()
Blackmagic-Design Drivers
|
||
![]()
Deltacast Drivers
For Intel and Silicon
|
In DEMO mode, the application will burn a blue frame in the recorded file or at output at some intervals. That's the only limitation and difference. After your test, you will keep on using the same application, just with the demo mode unlocked.
Purchase a license through one of our resellers or the Softron online store, then just activate your serial number in the License window or plug your dongle in the computer.
Just download the latest version and replace your previous version. It is always recommended to run extensive tests with your specific workflow and setup before putting a new version in production. You can use a free demo version for that on a separate computer. Previous legacy versions are available from the general downloads page.
You do not need to deactivate and reactivate your serial number when updating your Softron software. Read the following article to know when to deactivate.
This software uses code of FFmpeg, licensed under the LGPLv2.1 and its source can be downloaded here.
This software uses code of FFmpeg, licensed under the LGPLv2.1 and its source can be downloaded here.
This software uses the MediaInfo library, Copyright (c) 2002-2022 MediaArea.net SARL.
![]()
OnTheAir Studio
Version 3.8.1 - 10 December 2019
|
Download |
WARNING:
Once downloaded, unzip the file, and double-click on the installer to start the installation.
In DEMO mode OnTheAir Studio will quit after 10 minutes..
Purchase a license through one of our resellers or the Softron online store, then just activate your serial number in the License window or plug your dongle in the computer.
Just download the latest version and replace your previous version. It is always recommended to run extensive tests with your specific workflow and setup before putting a new version in production. You can use a free demo version for that on a separate computer. Previous legacy versions are available from the general downloads page.
You do not need to deactivate and reactivate your serial number when updating your Softron software. Read the following article to know when to deactivate.
This software uses code of FFmpeg, licensed under the LGPLv2.1 and its source can be downloaded here.
OnTheAir Tools is a free application that will help you build schedules for OnTheAir Studio. Note that you won't be able to analyse as-run-logs with the log analysis tool. The log analysis tool will only work with OnTheAir Video and OnTheAir Node.
![]()
OnTheAir Tools 1.34
9 December 2019
|
Download |
OnTheAir Switch
Version 2.9.4 - 30 December 2021
|
Download |
Once downloaded, unzip the file, and drag and drop the Application in your Applications Folder.
In DEMO mode, OnTheAir Switch will quit after 10 minutes.
Just download the latest version and replace your previous version. It is always recommended to run extensive tests with your specific workflow and setup before putting a new version in production. You can use a free demo version for that on a separate computer. Previous legacy versions are available from the general downloads page.
You do not need to deactivate and reactivate your serial number when updating your Softron software. Read the following article to know when to deactivate.
This software uses code of FFmpeg, licensed under the LGPLv2.1 and its source can be downloaded here.
GPICommander
Version 3.5.1 - 24 January 2023
|
Download |
Once downloaded, unzip the file, and run the installer. Connect your GPICommander box to your Mac in USB, then start the GPICommander application, and you should be able to control it.
The GPICommander application is a free application to use with the GPICommander box.
Just download the latest version and replace your previous version. It is always recommended to run extensive tests with your specific workflow and setup before putting a new version in production. You can use a free demo version for that on a separate computer. Previous legacy versions are available from the general downloads page.
We use cookies (and other similar technologies) to collect data to improve your experience on our site. By using our website, you’re agreeing to the collection of data as described in our Privacy Policy.