Release Notes

• General performance and stability improvements
• Potential crash at startup (when using 2 VU meters display)
• Contact Support: Log collect was not working when time was set to AM/PM

• Blackmagic-Design: Added support for up to 64 audio channels (with supported devices).
• Viewers: Added the ability to view up to 64 audio channels VU meters (with supported devices).
• Licenses: Green checkmark or Red cross were missing from the License window in version 4.1.3.
• Licenses: AV Preset UI issue

Release Notes for MovieRecorder Express and MovieRecorder

• NDI: Updated NDI SDK to version 5.5.3
• QuickTime Classic Destinations: When the QuickTime file writer has an unknown error, MovieRecorder will now resume recording in a new file after the error. Previously the recording would be stopped.
• Stream Deck: Added compatibility with new models of Stream Deck Mini and XL
• Blackmagic-Design: Logs could tell that there was no incoming signal, while in fact there was and it was an invalid frame that was received
• Logs: Improved logs, and added log when CPU usage goes above some limits
• NDI: Added an option to change the audio reference level to +20dB
• UI: Minor UI improvements (Wider token areas in custom naming, ...)
• Remote Control: Issue with the embedded control web page when using http://127.0.0.1:8080. It did not return the index.html page. It is now fixed, but note that with previous versions, it was possible overcome by using instead http://127.0.0.1:8080/index.html
• NDI: The pixel format popup menu now updates correctly depending on the incoming format (this was just a UI display issue, the recorded file should have been correct in previous version)
• UI: Issues with remaining time not shown when starting recording using REST API and specifying the record duration.
• UI: Remaining time vs elapsed time swap when clicking on elapsed/remainingTimeTextField
• Remote Control: Issues when locking/unlocking sources in remote. It was not working on multiple sources at once.
• Possible issue when using multiple destinations. This could happen: "Error: An unknown error (-11800 The operation could not be completed, underlying error -16364 The operation couldn’t be completed. (OSStatus error -16364.)) occured. As a result, the destination will stop."

Release Notes for MovieRecorder only

• Videohub Control: Added the "directly" method in AppleScript
• Metadata: Possible crash when editing metadata in preferences
• Ross Ultrix Control: Issues with Ross Probel switching. (We now log correctly if the switch was done correctly or not, and we can wait with beforeStartActions that the switch has taken place before starting a live clip).

• Deltacast devices: Added support for Rec. 2020 Wide Gamut and HDR (HLG & PQ)
• AV Presets: Added support for audio track languages
• Streaming Destinations: Added compatibility with Streaming Center 1.3 presets with Facebook compatibility. Note that Streaming Cetner 1.3 is required for this version of MovieRecorder, so make sure to update it as well
• Classic Destinations: Possible issue when recording is stopped where the header would not be written
• Timecode Sources: Issues with TimecodeSystems UltraSync Blue
• Viewers: Issues with the "selected" blue outline on viewers that were recording. Sometimes only the bleu "selected" outline was shown, but not the red "recording" status, which could lead to think that it was not recording.

Release Notes for MovieRecorder Express and MovieRecorder

• AJA devices: Memory leak when receiving RP188 timecode with AJA sources
• Viewers: When moving sources around, and preview refresh rate was different than "Every frame", a static frame could remain on the old location of the source in the Viewers
• Viewers: Preview was not deinterlaced anymore since version 4.5
• UI: Fixed minor alignments issues
• NDI Sources: The "Variable frame rate" options was not always "clickable"
• Quicktime Classic Destinations: When recording to ProRes to a Classic destination, on computers with hardware acceleration (M1 Max or Ultra for example), some encoded frames could be too large to be saved in the file. This change increases the datarate of some ProRes flavours and formats

Release notes for MovieRecorder only

• Metadata: Issue when changing set

Release Notes for MovieRecorder Express and MovieRecorder

• NDI: Updated NDI SDK to version 5.5
• REST API: Added a /info request to get info about the application and computer (version number, demo mode, etc...)
• Blackmagic-Design devices: When using devices with connector mapping, such as the Decklink Duo 2, Quad 2 or 8K Pro, we can now display which SDI connector is used by the device (click on the device name and format in the sources list).
• Blackmagic-Design devices: We log when there is a configuration change made by Blackmagic-Design Desktop Video Setup.
• AJA devices: Issues with name of AJA devices
• Remote Control: Possible crash when controlling MovieRecorder remotely
• Viewers: Refresh rate of preview was not properly applied
• UI: When clicking on the red icon of the window to close it, we now ask confirmation to stop the recording
• Remote Control: Preview in remote was black when using 10bit sources in macOS 12
• Streaming: Issues with downscaling in streaming destinations
• TimeCode: When using Mac Clock TC source, and fps is 23.98, we now compensate for the fact that there is no DF
• Classic Destinations: When encoding to ProRes, using a classic destination, you could see "Encoder produced a frame that exceeded max size

Release notes for MovieRecorder only

• AVID DNx: Added native support for DNxHD and DNxHR with Apple Silicon computers. You don't have to start the application with Rosetta anymore. This should bring improved performances on M1 and M2 computers when running natively
• Scheduled Recordings: Added a webpage to view and edit the scheduled recordings. The page can be viewed at this url (change the IP address if not on the same computer - and make sure to enable "Remote Control" in the General preferences of MovieRecorder): http://127.0.0.1:8080/schedule/index.html
• Actions: Changed the name of the AppleScript menus to reflect more what is happening (instead of before start, it now says on start as the AppleScript is triggered when the recording starts/ends)
• Actions: The 'Action on error' popup menu in "Preferences > General" is now properly saved
• Metadata: Issues when importing metadata from another computer
• Multi-Destinations: When using multiple destinations one one source using H264 or HEVC we did not reuse the encoder, even if AVPreset was the same, and thus reencoded multiple times.

Release Notes for MovieRecorder Express and MovieRecorder

• Added the ability to force the colorspace of a source (currently HDR and Rec2020 is supported only with Blackmagic-Design devices)
• Added the support for Rec2020 (SDR) for AJA devices
• Potential flickering of the preview. This did not impact the recorded file, just the preview
• Image distortion with in SD 8-bit
• After using the timer button, the button was disabled, preventing you to use the timer again
• UI issue where timecode could be cropped on small sizes viewers
• When scrolling in the view using mouse or trackpad, we could move the preview out of the frame
• Potential crash when selecting the Bluetooth Timecode option

Release notes for MovieRecorder only

• Now sending the path of the recorded file in the AppleScript as a second parameter

Important information

• About the Universal version of MovieRecorder and Apple Silicon computers:
  • Some of the encoders that we were using with intel computers are not yet available for the Universal version. Some will not be ported (as DV, DVCPro, DVCPRO HD which are legacy codecs), others will come at a later time. Check the list of supported codecs in the specifications on the MovieRecorder page.
  • M|Family:Download the Deltacast Universal drivers from our website.
  • ProRes Accelerators with M1 Pro, Max and Ultra are not compatible with interlaced sources. When using interlaced sources, the CPU will be used. We have reported the issue to Apple, and hope for a fix soon.
• Important changes:
  • We have removed the preference "Single view" when controlling MovieRecorder from a web page. We changed the logic a little bit; instead of doing a preference, it’s just a different page to type in the browser. You should now use this url to access the single page view:
    http://127.0.0.1:8080/index_single.html

Release Notes for MovieRecorder Express and MovieRecorder

• Native support of Apple Silicon computers. Applications are now universal.
• Added support for HDR and Wide Gamut Rec. 2020 capture (currently only with Blackmagic-Design devices, and only with QuickTime destinations)
• Added the ability to create a new clip when TC break is detected (only with QuickTime None or Segmented destinations; and the TC source must match the fps of the video source).
• Updated NDI SDK to version 5.0.10 for full compatibility of NDI with Apple Silicon computers.
• When receiving a SCTE trigger, we now log it. Making it a nice signal analyzer.
• Added the ability to control a Blackmagic-Design Videohub or Ross video router using AppleScripts . Read more...
• AppleScripts now send the source name as a parameter. Useful to do tests for example for notifications, or have a different behaviour depending on the source name.
• Added the ability to trigger an AppleScript when recording starts or stops per scheduled recording (previously only on destinations).
• Added notifications when a "Critical Error" would happen.
• Added support of bundled licenses (one serial can contain the license for multiple channels)
• Added the ability to disable the capture of VANC (and CC) on a per source base. Previously you could decide not to write a CC track in the file, but the VANC were always interpreted from the source, which could lead to issues in some very specific cases (when the signal providing the signal would enter wrong VANC or VBI data for example).
• Updated to latest versions of the Deltacast and AJA SDK.
• Deltacast: Added support for the pdf formats
• Crash happening when doing remote control with Catalina. Read more...
• Issue with fps of Classic QuickTime movie files when using an effect to change the fps from 50 to 25 or 60 to 30.
• Some audio drops could happen when using Blackmagic-Design devices
• Possible crash when recording a QuickTime Segmented or None to an Avid NEXIS storage.
• When doing auto-split, only the first recorded file would have the correct DF/NDF flag. All subsequent recordings would have the non drop frame flag even if using drop frame.
• Auto split with encoders that can produce an I-frame whenever needed. The durations will match one another. Note that some codecs may still have different split times depending on the GOP structure.
• When doing auto-split with AAC audio, there could be one sample of audio missing at the beginning
• Possible issue when creating new file after an auto-split
• REST API issue to update scheduled recordings
• Issues when using Streaming Destinations on Apple Silicon computers
• QuickTime > Classic destinations: ProRes Encoder on Apple M1 Pro and Max processors: maxFrameSize could be wrong.
• Scheduled recordings: Fixed issues when stopping scheduled recordings.
• An issue with some keyboard shortcuts with MovieRecorder Express.

Release notes for MovieRecorder only

• Now allowing to enter commas in metadata text fields
• Added support for DNxHR (currently Intel only)
• Issue with some signals providing more VANCs than just CC. Recording may have stopped in specific cases.
• Schedule issue for spring DST (on the Sunday of the change, scheduled recordings between 23PM and midnight would not be triggered)
• Crash when writing some sidecar metadata files with MXF destinations
• Some warnings when encoding to XDCAM (but had no impact on encoding, just excessive logging)
• Some possible duplicated frames at the end of XDCAM recordings.
• Some display issues for CC in Viewers.
• AppleScripts Actions were not triggered at the end of the recording if done with a schedule, or timer
• AppleScripts Actions could not retrieve the recording name of a schedule

• QuickTime Destinations: Added the ability to use .mp4 and .m4v containers when using the HEVC codec
• AJA: Added support for different audio inputs on the card (Analog, AES, ...)
• AVC-Intra: Issues when recording HD sources to AVC-Intra 200 
• Destinations: Fixed frame rate when having 2 destinations (one is without rate conversion and on with rate conversion)
• Auto-split: Recording could stop when doing auto-split with H.264 and HEVC recordings

• Activity & Logs Window: Added an option to split the window vertically or horizontally
• Stream Deck: Stream Deck status buttons on remote sources
• Remote Control: Issues with Catalina